top of page
acronym and word search
Zwiki
No | SUBJECT | DESCRIPTION |
|---|---|---|
501 | Power Take Off (PTO) | Design to use transmission torque for power other equipment on the vehicle. SAE 6-bolt – capable of providing 250-300 lb. ft. torque; SAE 8-bolt – capable of providing up to 500 lb. ft. torque; SAE 10-bolt (Allison only) – capable of providing up to 575 lb. ft. torque |
502 | Split shaft PTOs | A split shaft PTO sits in the driveline to power auxiliary equipment, using full engine power. When in use the power to rear axles is disconnected, so operation is in stationary mode only. Engine cooling becomes a consideration due to the loss of ram air through the radiator. This should not be confused with a transfer case. Power is routed above the rail. |
Page 1 of 1
Word Search
Power Take Off (PTO)
Design to use transmission torque for power other equipment on the vehicle. SAE 6-bolt – capable of providing 250-300 lb. ft. torque; SAE 8-bolt – capable of providing up to 500 lb. ft. torque; SAE 10-bolt (Allison only) – capable of providing up to 575 lb. ft. torque
bottom of page